13228 13228 13228

BlockerLite™ Pumpsack

Vielseitiger Beutel zum Aufblasen der Matte oder Schutz von Ausrüstung.
Mehr
Find Online
Der BlockerLite Pumpsack ermöglicht das Aufblasen im Handumdrehen und schützt vor Wasser. Er ist eine vielseitige und leichte Option zur Lagerung von Ausrüstung und zum Aufblasen von Matten. Der von SealLine entwickelte Pumpsack hat zudem besonders haltbare Schweißnähte. Sein Fassungsvermögen von 20 Litern reicht für die Aufbewahrung von zusätzlichen Kleidungsstücken, bevor er zum Aufblasen einer mit WingLock- oder TwinLock-Ventil ausgestatteten Isomatte verwendet werden kann.
  • Zeitsparend: Schneller als manuelles Aufblasen. Leichtes Einrasten in Ventile von Therm-a-Rest.
  • SealLine® Schutz: Dieser Packsack ist aus dem gleichen, besonders leichten und wasserdichten BlockerLite™ Material wie die Packsäcke aus dem SealLine-Sortiment gefertigt. Er ist daher besonders robust und schützt den Inhalt dank Schweißnähte.
  • Vielseitig: Dient nach dem Abbau des Zeltlagers als wasserdichter Packsack mit 20 Liter Fassungsvermögen.
13228
20 L
Green
5 oz
0.15 kg
5.5 in
14 cm
10 in
26 cm
24 in
61 cm
6 in x 6 in x 1 in
15 cm x 15 cm x 2.5 xm
20D Rip Nylon
NA
Polyester
Made in China
Wie sollte ich meine selbstaufblasende Isomatte das erste Mal aufblasen?
Damit Ihre selbstaufblasende Matte möglichst gute Dienste leistet, sollte sie bei der ersten Verwendung mit dem Mund oder mithilfe einer Pumpe bzw. eines Pumpsacks ganz aufgeblasen und dann zwei bis vier Stunden liegen gelassen werden.
Wie sollte ich meine selbstaufblasende Isomatte im Winter aufblasen?
Bei Minustemperaturen sollte eine selbstaufblasende Matte nicht mit dem Mund aufgeblasen werden, weil Feuchtigkeit aus dem Atem im Inneren der Matte gefrieren kann. Bei kaltem Wetter bläst sich die Matte evtl. langsamer von selbst auf. Falls Sie die Matte zusätzliche Luft benötigt, verwenden Sie am besten einen Pumpsack oder eine elektrische Pumpe.
How Does a Self-Inflating Sleeping Pad Work?
Self-inflating sleeping pads rely on the compressible and rebound-able open cell foam cores to self-inflate. The atmospheric pressure around the pad pushes air into the rebounding open cells when the valve is opened. Check out our blog post for more information.
How Long Should it Take for My Pad to Self-Inflate?
Generally, it takes 5-15 minutes for any of our self-inflating pads to inflate on their own. That 10-minute variance range is probably due to one of the following factors: core construction, trained compression, elevation and temperature. We find the most significant factor is trained compression (i.e. if your pad is new and has been factory rolled on the shelf for some time or stored rolled up for a few months). Check out our blog post to find out why.
Why Doesn’t My Self-Inflating Pad Inflate All the Way?
Self-inflation begins when the valve is opened and ends when equilibrium is reached between the atmospheric pressure outside the cells and the air pressure within the cells pushing the other way. In our experience, most users’ comfort level requires more air than the equilibrium level, which is why self-inflating pads don’t inflate “all the way.” Check out our blog post for more information.
Wie sollte ich meine Isomatte aufbewahren?
•Selbstaufblasend: Wir empfehlen, die Isomatte an einem trockenen Ort, nicht aufgerollt und mit Luft gefüllt (mit geöffnetem Ventil) zu lagern. Dadurch bläst sie sich bei der Verwendung schneller von selbst auf. Ein längeres Lagern an einem feuchten Ort kann zu Schimmelbildung führen, die in der begrenzten lebenslangen Garantie nicht abgedeckt wird. •NeoAir: Wir empfehlen, das Ventil geöffnet zu lassen und die Isomatte eng zusammengerollt in einem Packsack aufzubewahren, um sie vor Schmutz und scharfkantigen Gegenständen zu schützen.
Wie reinige ich meine Isomatte am besten?
Eine regelmäßige Reinigung verlängert die Lebensdauer der Isomatte, vor allem dann, wenn Sie direkt auf der Oberfläche schlafen. Reinigen Sie die Isomatte nicht in der Waschmaschine, sondern mit dem Gartenschlauch oder in der Badewanne. Vergessen Sie nicht, das Ventil vor dem Waschen zu schließen. Für allgemeine Reinigungszwecke genügt ein kurzes Schrubben mit Formula 409®, BioClean™, Allzweckreiniger oder allgemeinem Haushaltsreiniger. Video anschauen: Pflegehinweise für Isomatten von Therm-a-Rest® Baumharz entfernen Sie am besten durch direktes Abreiben mit einem in Spiritus getränkten Baumwolltuch. Dies ist etwas mühsam, und das Harz hinterlässt in der Regel Flecken. Kurzes Bestäuben mit Talkum oder Babypuder nach der Reinigung verhindert jedoch klebrige Reste.
Was mache ich, wenn meine Isomatte Luft verliert?
Wenn Sie vermuten, dass Ihre selbstaufblasende Matte von NeoAir Luft verliert, kann es sein, dass sie ein Loch hat. Unser Blog erklärt, wie Sie Ihre Isomatte selbst reparieren können. Wenn Sie Ihre Isomatte stattdessen an unsere Reparaturwerkstatt in Seattle schicken möchten, lesen Sie unsere Garantiehinweise.
Wie warm ist meine Isomatte und was hat es mit dem ASTM-Standard auf sich?
ASTM ist die neue Prüfnorm für R-Werte von Isomatten. Während Therm-a-Rest die Wärmeleistung von Isomatten bisher immer mit dem R-Wert angegeben hat, ermöglicht diese neue Norm einen direkten Vergleich mit anderen Anbietern. Lesen Sie unseren Blog für eine detaillierte Erklärung .
Was ist der Vorteil einer Isomatte mit Stretch-Strickgewebe?
Stretch-Strickgewebe hat eine unübertroffene Stützkraft, ist besonders bequem und fühlt sich angenehm an. Es passt sich der Körperform an und bietet sanfte Stützkraft auf Ihren Zeltabenteuern.
Kann ich das Ventil meiner Therm-a-Rest Isomatte ersetzen?
Ja. Mit dem Therm-a-Rest Ventil-Ersatzkit können Sie alle Isomattenventile aus Metall oder Kunststoff ersetzen. Die zugehörige Anleitung finden Sie hier. Video anschauen: Reparatur einer Therm-a-Rest® Matte
How do you inflate and deflate sleeping pads with a WingLock™ Valve?
  • Watch this video for step by step instructions on how to use the WingLock™ Valve
  • To Inflate the WingLock™ Valve:
    • Unroll your sleeping pad and open the valve cap by twisting it counter-clockwise.
    • Use a pump sack or breath to inflate your pad. The one-way valve will prevent air from escaping.
    • Continue inflation until the mattress is fully inflated and close the valve by twisting the valve cap clockwise.
  • To Deflate WingLock™ Valve:
    • Open the wings to open the one-way valve.
    • Open the valve cap by twisting counter-clockwise, allowing air to escape
    • Roll the pad toward the valve end, pushing any remaining air from the pad.
Can I replace my old Therm-a-Rest valve with a new WingLock™ Valve or TwinLock™ Valve?
No. WingLock™ or TwinLock™ Valves cannot be installed on products that originally included a Classic Therm-a-Rest Valve. If you’re not sure which valve you have please refer to the graphic below: Valve Type
What makes the WingLock™ Valve different from Classic Therm-a-Rest Valves?
  • Faster Inflation: Larger valve opening and one-way inflation allows three times faster airflow than our classic valve (with a pressurized air supply the Classic Valve flow rate measures to 2.2 standard cubic feet per minute, where the WingLock Valve flow rate measures to 6.5 standard cubic feet per minute, or a 295% difference).
  • One-Way Inflation: Unique design keeps air from escaping during inflation.
  • Deflation “Wings”: When it’s time to break camp, open the valve and twist the wings to deflate your pad twice as fast as our classic valve.
  • Watch this video to learn more
What makes the TwinLock™ Valve different from Classic Therm-a-rest Valves?
For our larger pads, we developed the TwinLock™ Valve which utilizes two one-way valves: a one-way inflation valve and one-way deflation valve that allows for five times faster deflation than our classic valve. Watch this video to learn more.
How do you inflate and deflate sleeping pads with a TwinLock™ Valve?
  • Watch this video for step by step instructions on how to use the TwinLock™ Valve
  • To Inflate TwinLock™ Valve:
    • Unroll your sleeping pad and open the “IN” valve by twisting it counter-clockwise.
    • Use a pump sack or breath to inflate your pad. The one-way “IN” valve will prevent air from escaping.
    • When the mattress is fully inflated and close the valve by twisting the valve cap clockwise.
  • To Deflate TwinLock™ Valve
    • Open the “OUT” valve by twisting counter-clockwise.
    • The one-way “OUT” valve will keep air from flowing back into the pad.
    • Roll the pad toward the valve end, pushing any remaining air from the pad.

Limited Lifetime Warranty

Every piece of Therm-a-Rest gear is designed to endure the rigors of your time in the backcountry. We offer a Limited Lifetime Warranty on all products, except electronic devices, which have a 2-year Limited Warranty.

To get your gear repaired, start a warranty claim or to learn more, visit Therm-a-Rest Warranty for more info.

Warranty image

Besprechungen