- Wasserdicht: Hergestellt aus 100% wasserdichten Materialien, um Schutz bei Nässe oder Feuchtigkeit zu garantieren.
- Höchste Qualität: Robuste, vinylbeschichtete Materialien halten starker Beanspruchung zu Wasser und zu Land stand.
- Robuste Konstruktion: Vollverschweißte Nähte bieten stärkeren und dauerhafteren Schutz als genähte und geklebte Nähten.
- Sicherer Rollverschluss: Unser original DrySeal™-Verschluss verstärkt den wasserdichten Schutz.
|5 LTR||10 LTR||20 LTR||30 LTR||40 LTR||55 LTR|
|Farbe||Black, Yellow, Red, Olive||Black, Yellow, Red, Olive||Black, Yellow, Red, Olive||Black, Yellow, Red, Olive||Black, Yellow||Black, Yellow|
|Weight (Standard)||7 oz||11 oz||14.5 oz||1 lbs 4 oz||1 lbs 8 oz||1 lbs 12 oz|
|Weight (Metric)||0.20 kg||0.31 kg||0.41 kg||0.57 kg||0.68 kg||0.80 kg|
|Width (Standard)||7 in||8 in||9 in||11 in||13 in||13 in|
|Width (Metric)||18 cm||20 cm||23 cm||28 cm||33 cm||33 cm|
|Length (Standard)||7 in||8 in||9 in||11 in||13 in||13 in|
|Length (Metric)||18 cm||20 cm||23 cm||28 cm||33 cm||33 cm|
|Height (Standard)||8 in||14 in||16 in||19 in||20 in||25 in|
|Height (Metric)||20 cm||36 cm||41 cm||48 cm||51 cm||61 cm|
|Volume (Standard)||280 cu. in||620 cu. in||1170 cu. in||1950 cu. in||2400 cu. in||3310 cu. in|
|Volume (Metric)||4.5 liters||10 liters||19 liters||32 liters||40 liters||54 liters|
|Closure||Dry Seal dual-strip roll-down||Dry Seal dual-strip roll-down||Dry Seal dual-strip roll-down||Dry Seal dual-strip roll-down||Dry Seal dual-strip roll-down||Dry Seal dual-strip roll-down|
|Material(s)||1000D 19 oz vinyl-coated polyester body, 1000D 30 oz vinyl-coated polyester bottom||1000D 19 oz vinyl-coated polyester body, 1000D 30 oz vinyl-coated polyester bottom||1000D 19 oz vinyl-coated polyester body, 1000D 30 oz vinyl-coated polyester bottom||1000D 19 oz vinyl-coated polyester body, 1000D 30 oz vinyl-coated polyester bottom||1000D 19 oz vinyl-coated polyester body, 1000D 30 oz vinyl-coated polyester bottom||1000D 19 oz vinyl-coated polyester body, 1000D 30 oz vinyl-coated polyester bottom|
|Country of Origin||MADE IN U.S.A. OF U.S. AND IMPORTED MATERIALS||MADE IN U.S.A. OF U.S. AND IMPORTED MATERIALS||MADE IN U.S.A. OF U.S. AND IMPORTED MATERIALS||MADE IN U.S.A. OF U.S. AND IMPORTED MATERIALS||MADE IN U.S.A. OF U.S. AND IMPORTED MATERIALS||MADE IN U.S.A. OF U.S. AND IMPORTED MATERIALS|
What is the difference between "splashproof," "waterproof," and "submersible"?
SealLine products use three ratings to describe water resistance:
- Splashproof: Withstands light rain and splashes. Only some of our products fall into this category. Suitable for use where light water resistance is sufficient, such as summer backpacking.
- Waterproof: Withstands quick submersions and will float if dropped in the water. Most of our bags fall into this category and are suitable for canoe, kayak and rafting use where boats may tip, flip or be swamped.
- Submersible: Withstands 1 meter of submersion for 30 minutes (IP-67 standard). Suitable for use in extreme and prolonged wet situations.
With such ratings, water resistance depends on the user carefully and properly sealing the closure. For roll-top closures, this means a minimum of three tight, wrinkle-free rolls. For zipper closures, the zipper must be completely and properly closed.
What is the difference between polyurethane- and vinyl-coated dry bags?
Our premium polyurethane-coated (aka, PVC-free) dry bags offer significantly greater puncture and abrasion resistance than vinyl-coated dry bags, while also being lighter weight. For example, our PVC-free dry bags weigh approximately 8-14 oz. less than our vinyl-coated dry bags. In addition, the PVC-free polyurethane coatings are less harmful to the environment than vinyl coatings.
Our vinyl-coated dry bags are economical and resistant to punctures, tears, and mildew. They remain pliable at low temperatures and resist cracking.
What is special about the DrySeal™ roll-top closure?
Our exclusive DrySeal roll-top closure is easily identified by its two separate stiffening strips below the opening of a roll-top product. This makes it easier and more intuitive to achieve an optimal seal—for the first “roll” in closing the top, simply fold the top over between the two strips of material, then roll closed at least two more times.
This design also amplifies protection from the elements by adding an additional “virtual” roll.
How do I properly seal a roll-top dry bag?
We recommend a minimum of 3 folds (aka “rolls”) to properly seal a roll-top dry bag. For an optimal seal:
- a. Make sure the stiff sealing strips are wrinkle-free. Close the dry bag so that the sealing strips are pressed together
- b. While holding strips together, push down to “burp” out trapped air. Once trapped air has been “burped” out, tightly fold the top over several times so that the roll-top closure has been folded at least 3 times
- c. Connect the buckle in the direction opposite to the direction the material was folded, or along the sides when side buckles are present
Are the listed dimensions for roll-top dry bags measured rolled or unrolled?
All of the dimensions we list for our roll-top dry bags are the dimensions when the dry bag has been properly sealed (tops rolled down three times and secured).
Why do some of your dry bags have a waterproof purge valve?
These purge valves let you easily vent excess air trapped within a sealed dry bag without compromising water protection. Venting trapped air prevents the bag from “ballooning”, helping it compress and save valuable space. We selectively use these valves on products that may frequently be strapped down and/or compressed and stowed in tight spaces.
Which size dry bag should I choose?
Our dry bags are sized volumetrically in liters. To help illustrate how those volumes translate to real world use, here are some typical things you might put in various sizes of dry bags:
- 5L = a few meals for two, baselayers, or other small essentials
- 10L = a down jacket, food for the weekend, or a small sleeping bag
- 20L (most versatile size) = a typical sleeping bag, a couple changes of clothes, or bulkier gear items like a tent or camp kitchen setups
- 30L+ = from 30L and up, most items for an overnight trip can fit into one of these sizes
What are welded seams?
Welded seams use radio frequencies (RF) to join two pieces of coated fabric together at the molecular level, effectively bonding them together as one. This strong, reliably waterproof construction method is far superior to sewn-and-taped seams.
With sewn-and-taped seams, two pieces of coated fabric are held together with thread and a piece of protective tape is placed over the threads and seam to provide water protection. A RF welded seam can withstand up to 2x more stress than a sewn-and-taped seam, resulting in a more protective and longer-lasting seam. This is why we use welded seams with all of our dry bags.
What’s the difference between a dry bag and a packing system sack?
- Dry bags come from the paddlesport world. They are made from heavy-duty materials that withstand the stresses of exposed, demanding use in or around wet, aquatic environments. Dry bags are frequently used by paddlers (e.g., canoe, kayak, raft, SUP), though they are increasingly used on land in circumstances where their durability and protection against the elements are beneficial.
- Packing system sacks come from the camping/backpacking world and are typically made from lightweight or ultralight materials. They are meant to be put inside a larger pack or bag, providing selective water protection and/or organization for specific items (e.g., sleeping bag or clothing) with minimal overall weight penalty.
How should I clean, maintain, and store my dry bag?
Regularly cleaning and maintaining your dry bag will substantially increase its life. After each use, dry bags should be cleaned and aired out. Dirty bags can be washed with a soapy sponge and rinsed, allowing them to air dry. Store clean dry bags completely dry, inside out. Keep all insect repellents and solvents from making direct contact with dry bags—if contact occurs, wash the bag thoroughly.
For vinyl-coated dry bags, such as our Baja™ dry bags, an occasional wipe down with a vinyl preservative, such as Armor All®, will help maintain the vinyl-coated bag’s suppleness. (Armor All® is an Armor All Products registered trademark.) Use of a vinyl preservative is not necessary for polyurethane-coated (aka, PVC-free) dry bags.